Differences

This shows you the differences between two versions of the page.

--- terra4d:installation [2019/02/13 09:38]
wikiadmin
+++ terra4d:installation [2021/07/26 14:27] (current)
editor [Installation instructions TERRA 4D software]
@@ Line 1: / Line 1: @@
 ====== Installation instructions TERRA 4D software ======
 Information about how to install TERRA 4D software and demo configurations.
-Please refer also to the Installation Guide for more details: {{terra4d:terra4d_installation_guide.pdf}}
+Please refer to the installation guide for more details: {{terra4d:TERRA_4D_Installation_Guide.pdf}}.
-===== Download software =====
+The main aspects are listed on this page but it is recommended to follow the instructions in the installation guide carefully.
-===== Instructions for TERRA 4D program file installation =====
+==== Hardware requirements ====
-===== Instructions for TERRA 4D demo data installation =====
+Hardware requirements are also listed in the installation guide. Beside the general computer hardware requirements it is important to know that TERRA 4D uses OpenGL so please make sure an appropriate graphics card is installed.
-===== Hardware requirements =====
+==== Download and installation of program files ====
+Download the program installer from the ftp server (for ftp details please check the installation guide).
+The same installer is used for client and server installations.
+There are two important directories to define during the installation process:
+  * Program directory: all program files
+    * Default directory: C:\Program Files (x86)\FASTProtect\Terra4D
+    * Space requirements: about **1GB**
+  * Data directory: configuration and GIS data
+    * Default directory: C:\ProgramData\FASTProtect\Terra4D
+    * Space requirements: depends on project but GIS data can be huge
+==== Download and installation of demo data ====
+This section is only required if a demo system will be set up.
+The demo configuration including GIS data requires about **40GB** of disk space.
+The demo data needs to be downloaded and installed from several packages:
+  * Installer for demo configuration and basic data sets
+  * GIS data for orthographic layers
+  * GIS data for buildings
+  * other optional data sets
+Download all required demo data from the ftp server (for details please check the installation guide).
+The installation is done through executable installers and compressed files which need to extracted manually.
+==== Access to live cameras at FAST office building ====
+A VPN connection is required to access the live cameras at the FAST office building in Friedrichshafen.
+If this shall be part of the demo then OpenVPN should be installed. Please ask your contact person for OpenVPN key file.
+For more details check the installation guide.
+**Note**:
+If you problems to watch the videos in the FAST Meetingroom, please check in the Configurator if the subsystem "Milestone" has the status "Ok". If not, please try to fix this issue first, e.g. check that OpenVPN was started before Terra 4D and that the network connection is established.
+If subsystem "Milestone" is "Ok", the network may not be able to resolve the name of the Milestone Server correctly. Since the server name (in this case "Milestone PC") is mandatory after a first contact by the SDK of Milestone used in Terra 4D, you have to do the add the following line to your "hosts" file in the directory "Windows\System32\drivers\etc\":
+<code>
+.168.214.156 Milestone-PC
+</code>
+After a restart of Terra 4D the videos should be displayed, otherwise please do not hesitate to contact FAST Systems.

User Tools

Site Tools

Differences

Page Tools