Differences

This shows you the differences between two versions of the page.

--- terra4d:moxa [2022/07/28 08:14]
editor *
+++ terra4d:moxa [2022/07/28 10:10] (current)
editor [Other hints]
@@ Line 39: / Line 39: @@
   * Within the device web page, in the main menu, within User-Defined Modbus Addressing, select Analog Inputs, Digital Input/Outputs (or similar):
      * Make sure "Enable Modbus/TCP Slave Protocol" is enabled
-     * Within the table all the addresses of the available data points are listed. E.g. "AI Value (Raw Data)" at "0512" as Input Register (read-only), Reference Address "30513"
+     * Within the table all the addresses of the available data points are listed. E.g. "AI Scaling Value (Float)" at "0520" as Input Register (read-only), Reference Address "30521"
-     * Within Terra4D use "Analog Input" with the address 513 (the 30000 is automatically added by selecting Analog Input).
+     * Within Terra4D use "Analog Input" with the address 520 (the 30000 is automatically added by selecting Analog Input).
  * [[https://store.chipkin.com/products/tools/cas-modbus-scanner|CAS Modbus Scanner]] Tool to read/check Modbus device and see the values returned by the device.